2023 CONTENTS

1 THEORY AND RESEARCH

Experimental study on continuous final refining of carbon black formulated rubber ........Xiao Xinxin, Bian Huiguang, Xu Minghui,Wang Luyin, Niu Guangzhi, Wang Chuansheng (1-12)

Synthesis and characterization of polystyrene/polyaniline coreshell composite..................................................Dou Pengfei (3-19)

Discussion on the application of automatic logistics transportati on system in raw tire transportation..................................Ren Yi, Chen Yadong, Jiang Hongbo (3-24)

Research progress of compression and rebound characteristics based on graphite gasket ..............................Yin Xiaoming (3-29)

Study on the properties of carbon black and graphene modifie d by silane coupling agent in natural rubber........................................Wang Jianjun, Bai Pengxiang, Dong Jie,Qiu Yanwu, Weng Peijin (4-16)

Preparation and performance study of HDPE/PA6/UHMWPE composites......Liang Zhengchen, Li Beibei, Wang Xuanlun (5-9)

Modification of TOR/special recycled rubber and its application in oil resistant products .............Wang Zhongguang,Xu Yunhui, Zhao Guiying, Zhang Xiaoping, Xu Mingyun (6-10)

Research on the implementation of standardized design in liquor packaging enterprises ...........Hu Changhong, Pan Yajun,Yang Jihong, Guo Weidong, Wang Xuanlun (6-14)

Preparation of tire rubber powder recycled rubber by a new process of ultrasonic desulfurization and its performance study........................Zhang Xiaoping, Wei Bangfeng,Zhang Hangtian,Kou Zhenyang (6-18)

Preparation and performance study of polyamide composites for high-strength wear-resistant fibers ....Li Wei, Wu Huimin (7-13)

Study on toughening modification of whisker reinforced PET composite materials ......................................Wen Haoyu, Wu Bo,Gao Lingqiang, Guo Bin, Li Xuan (7-18)

Accuracy influence of tire building machine on tire quality......................................................................................Ping Lv (8-14)

Research progress of fiber deodorization function...........Wang Yan, Wu Xiaonan, Long Qiao, Mai Xueyuan, Li Fei,Cheng Jie (8-17)

Research on the key influencing factors of SB and RRO for all-steel radial tires ...........................................You Zhaoxin, Che Xiangji (9-10)

Experimental study on tensile properties of TPU conduits......................Guo Nan, Miao Wei, Cheng Lingling, Chen Pengtao,Yang Xiaole, Li Ruobing, Li Menglai, Chen Yongzhen (9-16)

Research progress on defect improvement and quality control methods for precision injection molded products ....Chen Miao,Zhao Nanyang, Xu Zhongbin, Fu Jing, Wu Qiong (10-13)

Research on the key influencing factors of SB and RRO for allsteel radial tires（2）.................You Zhaoxin, Che Xiangji (10-19)

Research on the application of waste tire cracked carbon bla ck in rim strip ..................Ma Licheng, Wang Beibei, Wei Yushan,Zhao Pengfei, Xu Yong, Zhou Shifeng, Zhao Jinping (10-27)

Research on the application of silane coupling agent modified nano calcium carbonate in PVC composite materials..........................Deng Chuanfu, Yan Gancai, Du Nianjun (11-13)

Experimental study on the gas tight layer of all steel tire filtered by a gear type rubber filter..........................Bian Huiguang, Gu Xihong, Wang Chuansheng,Sui Zhihua, Zhu Donglin, Hao Guoqiang (11-18)

Analysis and interpretation of compression permanent deform ation test standard.............................You Liming, Cheng Wenjia,Liu Mingtai, Jin Haonan, Li Quan (11-25)

Study on the synthesis and properties of temperature resistant copolyesters ...........................Yang Chaogui, Zhou Xin, Du Fugang,Deng Xiaoliang, Wang Kaili (12-11)

Discussion on the management of rubber pressure rollers based on the apparent problems in film winding.............................................Li Zhongguo, Yu Tao, Ye Shiqiang (12-15)

Study on the structural properties of PET/PEN composites...................Wu Bo, Gao Lingqiang, Wen Haoyu, Li Haikuan (12-45)

2 SPECIAL AND COMPREHENSIVE REVIEW

How additive manufacturing empowers molded plastics intelligence to become a new industry .........Yang Jianjing (1-1)

Research progress of halogen-free flame retardant glass fiber reinforced nylon composites ............................Chong Yunsheng,Wang Liyan, Bie Zhi, Wang Meng, Bai Jin (1-6)

Research progress of epoxy asphalt for road..........................Cheng Yuanhai, Yang Wei, Li Lei, Wang Shifeng,Zheng Sixun (2-1)

Development application and direction of laser cleaning technology for active mode..............................................Zou Tao, Yang Heyi, Qiu Lianbo (3-5)

Analysis of visual inspection methods for tire defects................................................................................ Lu Mingbi (3-14)

Application field and domestic industrial layout of degradable plastics ......................................................Yuan Dahui, Yao Yi (4-1)

Utilization and prospect of converting waste tires into recycled rubber powder ..........................Jiang Biyou, Wang Xiaochu (4-5)

Overview of 3D bioprinting technology .............Chen Shanshan,Wang Xixi, Gan Min, Chen Xiaohang, Wu Junhao (4-9)

Research status and prospect of sealing performance of PTFE gasket ...............................................................Yin Xiaoming (4-13)

The future development direction of waste tire application in China .........................................Jiang Biyou, Wang Xiaochu (5-1)

Analysis of economic operation and industrial layout development goals for shandong tire industry in 2022................................................................Li Xinshang, Li Lange (5-5)

The current situation and countermeasures of special equipment safety management in manufacturing enterprises..........................................................................Gai Dianzhong (6-1)

Discussion on informationization strategies for cost reduction and efficiency enhancement in tire enterprises............................................................................Fan Jianhong (6-5)

Current market status and research progress of electronic grade polyimide films.........................Pan Li, Liu Tiantian, Wu Haitao, Feng Chong (7-1)

Exploration of systematic design for liquor packaging.........................................................................................Ge Jia (7-6)

Analysis on the safety management situation and countermeasures of tire manufacturing enterprises..........Gou Binxiang, Jiang Chao, Li Jianqing, Liu Pengwei (7-10)

Discussion of sustainable plastic packaging under SDGs......................Guo Bin,Wen Haoyu,Pu Zuwen,Zhao Xueping (8-1)

How to effectively promote the continuous operation of safety production standardization of tire companies ....Gou Binxiang,Jiang Chao, Li Jianqing, Li Chaomin, Liu Pengwei (8-6)

Analysis of structural design based on liquor plastic packaging opening experience .................Diao Houchang, Guo Weidong,Wang Chuanlong (8-9)

Research progress in surface modification technology of inorganic fillers for rubber composite materials .............Deng Changyou (9-1)

Research progress in the process, identification and application of recycled plastics .............Yu Qiaoling, Chen Weili, Liang Sentao,He Guoshan, Ye Yuanjian, Wang Wanjuan, Dai Mingbiao (9-5)

Reflection on the failure analysis of bottle molds...........................................................................Huang Bizhen (10-1)

Design and investigation for the snap-fastener structure of plastic packaging ...................Zeng Lingyang, Wang Chuanlong (10-6)

Research and prospect of automation intelligence of hollow blow building machine unit ............................Liu Junqiang (10-9)

Discussion on the development status and countermeasures of waste tire thermal cracking industry..............................Huang Chuanjin, Pan Junqing, Guo Jun (11-1)

Application progress of special sealing elastomers in the construction machinery industry............................................Li Jie, Wang Yanqiu, Zhu Muwei (11-8)

Analysis of the effect of stabilizers on the processing and properties of rigid polyvinyl chloride (PVC-U) pipes for water supply ..........................................................................Li Xiaoxuan (12-1)

Discussion of the new layout and structural improvement of rubber twin-screw extrusion tablet press .................Li Jianxing (12-6)

3 MATERIALS AND FORMULATIONS

Study on preparation and properties of modified attapulgite reinforced tire compound.........................Zhang Xiaoping, Wei Bangfeng, Yang Hui, Wang Zhongguang(1-49)

Development and application of macromolecular composite polyester plasticizer........................................Wang Duoren (1-54)

Effect of the difference of solution polymerized styrene butadie ne rubber on the performance of tire formula.................................Chen Jian, Shao Changcheng, Zhang Ning,Cao Jinzhong, Li Haiyan (2-36)

Study on the reaction mechanism of benzothiazole sulfonamide accelerator with stearic acid and zinc oxide by in-situ infra red spectroscopy ...........Cao Cuiling, Jiang Huabo, Yang Zefu (3-43)

Study on properties of hydrogenated nitrile rubber with different saturations .................................................Ma Yan (3-49)

Application of nanotube carbon black in AFLAS rubber...........................Lu Daosheng, Cheng Wenjia, You Liming (4-33)

Determination of molecular weight and distribution index of polybutadiene rubber by GPC method ................Like . Lili (5-28)

Carbon nanotubes with organosilane functionalization improve abrasion and rolling resistance of silica-silane tire tread compounds ................................Zhang Yu, Compiler (5-32)

Research progress on premixing and equipment for polyvinyl chloride (6-PVC) materials ...........................Qiu Yonghong (6-38)

Analysis of surface pollution and aging characteristics of retired silicone rubber composite insulators...........................Chen Yujun,Hu Shasha,Xiao Qiao,Wang Yining,Cao Changlin,Yang Songwei,Cheng Huiqing,Chen Qinghua,Qian Qingrong(7-36)

Effect of crosslinking network on the aging and high temperat ure resistance of EPDM/POE blended rubbered rubber...............................Gong Weiying, Zhang Yong, Deng Tao (7-42)

Comparison of SSBR with moderate styrene content in PCR formulation ............Wang Yue, Ji Hailin, Li Ke, Yuan Dongchang,Yang Hongtao (8-25)

Optimization of tire body formula for all steel radial truck tire...............Xue Dan, Shen Chunhe,Xiao Chun,Luo Huajuan (8-29)

Application of antioxidant STMQ pro in all-steel radial tire formul ation ..............................................................Shao Changzhong (9-30)

Analysis of influencing factors on improving the tear strength of cabin door sealant .........Min Yalan, Suo Junying, Zhou Chuyue,Zhou Ziyi (10-38)

Elastic silicone material selection and finite element analysis se lection ...........Zhang Jie, Zhang Hong, Chang Shiwen (10-42)

Study on room temperature adhesion between vulcanized rub ber and metal..........Quan Haiyuan, Feng Jin, Lin Xiaoming,Ma Ying, Gao Jing, Zhang Xianhui (10-47)

Research on the preparation and performance of antibacterial PA6 materials for nylon.........................Li Wei, Lin Dongliang, Yu Liling, Wu Huimin (11-47)

4 MACHINERY AND MOULD

Research on multi-position injection mold technology.......................................Luo Gang, Liu Zongyi, Zhang Yihai (1-31)

Application of pseudoplastic fluid model in the mold modification design of rubber cold runner injection curing press......................................................You Zhaoxin, Xu Chunmei (2-18)

Biaxial oriented drawing device for PE pipe........Zhang Youxin, Feng Jinmao, Zhou Qingguo, Cao Shixiong,Wang Di (3-33)

High efficiency closely intermeshing parallelcounter rotating twin screw extruder for filtering of elastomer compounds..................................................................................Zhang Yu (4-25)

An automatic gripping device for raw tires........................................................Wang Hongzhi, Li Lianhui (7-22)

Introduction to the structure of film cooling linkage line.....Lu Yonggao, Sun Youping, Shi Yongzhi, Zhang Bingliang (7-26)

5 NEW TECHNOLOGIES AND NEW PRODUCTS

Development of a kind of covering compound for belt conveyor drum in coal mine ...Xu Chunmei, You Zhaoxin (1-27)

A small-scale production unit of polymethyl methacrylate................................................................................Shi Hongjin (2-11)

All-steel three-drum building machine innovation introduction.................Hong Yuxian, Pan Ting, Zhang Hong, Jiang Yue (2-14)

Development and application of hydraulic B-type central mechanism ...............................Fu Changli, Ding Zhentang (4-21)

Development and application of tire vacuum vulcanization machine ....................................Fu Changli, Ding Zhentang (6-24)

Application of laser marking technology in tire production......................................................Hua Jianmin, Pan Jitang (11-29)

Design, performance testing and simulation research of physical microfoaming screw ..........................Sai Yandamuri, Zhang Yuxiao,Shi Xiaoqing, Chen Chihui (12-26)

6 EQUIPMENT MANAGEMENT AND MAINTENANCE

Application of leak stoppage technology with pressure in tire manufacturers.......................Bao Jianqing, Wang Qiying, Yuan Chaowei (2-49)

Statistical analysis of equipment failure .............Li Xiaohua (2-56)Common faults and analysis of rubber tire packaging machine....................................................Wang Pengyu, You Jinghui (4-48)

Cause analysis and solution for the leakage problem of internal mixer feeding hopper ...................................................Li Yuankun,Chang Qingjie, Ni Gendong, Jiang Linde (4-52)

PCR molding machine tailstock locking modification and effect analysis ..............Sun Mingwu, Cui Weiguang, Chen Hao,Wang Haiwei, Tian Xueyou, Song Yuefu, Cheng Zi'an (5-45)

Electrical transformation of tire durability test mileage machine...................................................................................Bu Fanlei (5-49)

Function introduction of the wire ring making machine after the optimization of the electrical system........................................Luo Chengli, Chen Feng, Wu Bo, Jin Bo,Qu Hongxu, Liu Jing (6-55)

Talking about the safety risk points and countermeasures of tire industry ................................Li Jianqing, Jiang Chao, Li Youquan,Gou Binxiang, Sun Jinyin (8-55)

Measures to reduce the production and usage costs of compressed air ........................................................Zhang Jian, Wang Qiying (9-50)

Impact of static electricity on product quality in film slitting process and countermeasures ....................................Li Zhongguo (11-70)

Analysis of causes and countermeasures of boiler water-cooled wall leakage ...........................................................Zhang Qian (12-59)

Economic benefit analysis of the air compressor blowing dryer renovation in tire factory...............................Song Yuetao, Leng Jian, Song Yuexin, Yue Yunli,Shang Rongwu, Cheng Jianjian, Li Chaomin, Qin Zenghui (12-64)

7 INDUSTRIAL AUTOMATION

Study on the automatic conveying system of finished compound ......................Yang Xiao, Yan Jianlong, Lu Yonggao,Zhao Zunmei, Teng Zhaojun, Ding Shanwei (1-76)

Application of Huichuan servo system in environmental protection plastic thermoforming machine....................................Liu Ying (9-63)

Practical application of information technology and automation technology in mixed rubber production .....................Hua Jihua,Lu Ruquan, Zhang Xingxing, Li Ya, Zheng Cheng (10-72)

Secondary calibration control system for oil weighing of upper auxiliary machinery...............Zhao Zhe, Qu Yanhong, He Donghua, Li Wenjie (11-74)

8 PRODUCT AND DESIGN

Design and production process of injection molding products with high transparency and large wall thickness.........................................Bi Jian, Pan Yajun, Wang Xuanlun(1-80)

Warpage optimization based on moldflow and full factor experimental design .................................Nie Heng, Jin Xin (2-65)

Design and research of the wear tester for track plate adhesive...................................Wang Dong, Huang Lei, Chen Bang (3-61)

Development of PTD4 intelligent semi-steel MT tire two step buiding machine automatic tire unloading weighing conveyor line .......Zhao Yangang, Zeng Xianfu, Chen Hao, Pu Zhidong (4-62)

Design and application of automatic trimming device for inner liner production line............................Bao Jianqing, Yuan Mingfang, Lou Hong (4-66)

The variation law and influencing factors of gear contact line.......................................................................................Sun Qi (5-58)

Clone design and calculation of modified helical cylindrical gears ...................................Wen Genbao, Shi Wen, Wen Li (5-63)

Cloning design and calculation of modified worm and modified worm gear .........Wen Genbao, Shi Wen, Wen Li (6-63)

Design and application of automatic tire tread pick-up device.............Bao Jianqing, Liu Ling, Yuan Mingfang, Lou Hong (7-68)

Design and application of compound oil cylinder for vulcanizing machine ............Fu Changli, Ding Zhentang, Zhang Hanjun (7-72)

Development of a new type of efficient feeding frame for electric motorcycle tire molding carcasses.........................Lu Zhen, Lu Yonggao, Yan Jianlong, Pang Yangfan,Diao Wenli, Yang Xiao, Li Deqing (9-67)

Design criteria for fatigue strength calculation of injection molding machine barrels ...............Yuan Weiming, Cheng Mingxiang (9-71)

Anti-seismic force simulation of single-layer tower based on Ansys Workbench ...................................Xu Feng, Yang Yuxin, Lin Xu (9-77)

Analysis of the spindle support span of the semi-steel two-secti on first stage building machine based on the finite element method..................................................................Zhang Bo (10-78)

Structural design of press type sealed storage tank..................................Liu Yang, Wang Chuanlong, Guo Weidong,Diao Houchang (11-79)

Injection molding process and mold design for thin-walled plastic parts .............He Xiaohui, Lei Fan, Ding Yongfeng, Zhou Zhe (12-69)

9 TEST AND ANALYSIS

Research status and analysis of plasticizer synthesis and application ...................Zhao Kunyu, Zhao Yanhui, Zhuang Xiao,Yang Bowen, Wang Liyan (1-62)

Anti fatigue agent Topfill? N98 application of reducing fatigue deformation of rubber damping products......................................Liu Shiduo, Zhao Xukui, Zhang Mingdong,Yang Chunhui (1-67)

Study on the influence of injection molding process on PC/ABS testing performance...............................Yuan Song, Zhang Xuefeng, Yan Weilin (2-41)

Research and analysis of ultrasonic welding technology for plastics ...............Zhang Xiang, Tan Weichao, Shi Shaowei (2-46)

Research progress of wear resistance of polytetrafluoroethylene modified by inorganic fillers ......................Dong Guanghui (3-52)

Study of mechanical and electrical properties of SMC sheet molding plastic for insulating plates of EMU electric connectors....................................................................Gong Xiangliang (3-56)

Application of the components with secondary components for the curing press external temperature pipe............................................Xu Xiang, Xu Wen, Tang Jiaguo (4-37)

Influence of tread porosity on tire quality and control measures............Zhang Zhijian, Zhang Chao, Wang Jizeng, Li Wanshun, Li Jiulong, Yang Zhen (4-44)

Simulation of the hydraulic system for opening and closing mold of curing press based on quantitative pump and throttle speed regulation......Chen Luqi, Ai Zijian, Zhang Jie, Chen Ye , Chen Kexin (5-35)

The influence of FKM and FFKM on the maximum service temperature of seals under different vulcanization systems...................................Song Yuqian, Liang Gang, Compiler (5-39)

The effect of a new antioxidant Vulkanox ZMB2 on the properties of EPDM blended rubber.......Chen Zhilong, Shen Liying, Xu Yingshu, Wen Yanrong (6-42)

Research on the influence of internal mixing process on sulfur dispersion of rubber sheet ...................................Yuan Xiao (6-47)

Research and analysis on the use of group control for air compression stations in tire factories............Song Yuetao, Li Chaomin, Qin Zenghui, Shang Rongwu,Cheng Jianjian, Xu Xingguo, Sun Jinyin (6-51)

Design and application of fatigue performance test for rubber elastic components in rail transit ............Peng Liqun, Lin Dawen,Zhou Peng, Wang Yeqing, Wang Jin (7-48)

Study on theinfluence of twin screw extrusion process on the optical properties and color of polycarbonate optical materials.....Meng Ming, Xiao Zhigang, Hou Linmu, Zhang Xiaoxiang (7-54)

Effect of MH content on the sulfurization reaction of EPDM peroxide.......Yao Wansheng, Dong Yong, Wang Zhaofei, Zhang Baiyao,Wang Ping, Wang Chenxi, Zhou Yiyang, Ding Yunsheng (7-58)

Application of capability analysis of destructive measuring system in friction coefficient measurement of rubber materials.....................................................................Deng Changyou (8-32)

Simulation and experimental research on the pyrolysis chamber of the disc type waste rubber pyrolysis equipment.....................................Zhang Cangang,Liu Jidong,Li Yong (8-37)

Effects of carbon black structure and particle size on tensile mechanical behavior and wear properties of NBR vulcanizate...............................Sun Zhenhao，Zhang Yong, Deng Tao (8-44)

Effects of suspension-method and emulsion-method PVC on properties of NBR/PVC foams......Ding Xiangyu, Gao Heyong, Gao Hechang, Shi Fengzhang,Wang Feng, Zhang Jiansong (8-50)

Analysis and improvement of bead bubbles in all-steel tubeless radial tires ...................................................Li Fengwei, Jiao Shouwan,Ye Qiang, Chang Suling, Jing Yongbo (9-36)

Effect of different antioxidants on the adhesion performance of water-based adhesive adhering V-band wrapping adhesive.............................................Gong Weiying, Xue Bin, Deng Tao (9-40)

Study on the effect of extruded porosity on tire wear......................Dai Weipeng, Lei Zhen, Li Weige, Shen Chunhe (9-45)

Effect of blending ratio on the properties of EPM/EPDM rubber blends .....................Fu Quansheng, Wen Yanwei, Wen Yanrong,Jia Hongbing (10-50)

Effect of different vulcanization systems on the mechanical properties of hydrogenated nitrile rubber....................You Liming, Liu Mingtai, Jin Haonan, Li Quan (10-55)

Force simulation of roller shaft head welding based on Ansys Workbench ........................................Yang Yuxin, Xu Feng (10-58)

Analysis of welding line defects in injection molding parts..............Deng Fengyi, Lai Denghui, Peng Shuangshuang (10-63)

Study on air outlet uniformity of blown film rotary traction air cushion roller based on Ansys Fluent...........................................................Huang Yifan, Xu Feng (11-52)

Analysis of clamping accuracy of belt bundle layer transferring based on finite element method ......................Yang Huili (11-56)

Analysis of the influencing factors on the compatibility and pu ll-out performance of plastic bottle caps and glass bottles............................Ling Shengyu, Wang Chuanlong, Yang Jihong,Hu Changhong, Liu Yang, Guo Shan (11-66)

Simulation analysis of blown film die head thermal expansion based on Ansys Workbench ......Huang Yifan, Wang Xiawu (12-50)

Exploration of design concepts to reduce the effects of air spring rubber stack bulging failure..............Yu Xiaodong, Jiang Ling, Xu Wenxue, Lai Qingcun (12-54)

10 ENVIRONMENTAL PROTECTION AND ENERGY SAVING ADN SAFETY

Management and planning of carbon emission and carbon neutralization of tire manufacturers..................................................Bao Jianqing, Wang Qiying (1-70)

Optimization of wastewater pretreatment process for rubber auxiliary production .......................................Han Qingqing (2-61)

Whole process management and safety control of solid waste in tire manufacturing enterprises...............................................Wang Shenhua, Wang Qiying (4-56)

Analysis of energy consumption in the vulcanization process of all-steel tires....Song Yuetao, Wang Feng, Li Ming, Li Chaomin, Qin Zenghui,Cheng Jianjian, Li Jianqing, Gou Binxiang (5-54)

Application and development of waste tires in highway construction...........................Wang Xiaochu, Jiang Biyou, Nie Xiaomei (8-60)

Analysis of the minimum configuration quantity requirements for fire extinguishers in tire enterprises......................Li Jianqing, Gou Binxiang, Jiang Chao, Song Yuetao,Li Youquan, Huang Minmin, Chen Yingbo (9-55)

11 TECHNOLOGY AND APPLICATION OF VEHICLE PRODUCTS

Feasibility analysis and design of injection mold structure scheme for car outer opening handle end cover........................................................Xiong Lijun, Wen Genbao (2-6)

Development status and design of electric vehicle tire........Li Huimin, Liu Baotao, Zhang Kaikai, Wang Longqing (1-19)

Analysis on the improvement of NC machining precision of automotive precision injection mold ...............He Jiachun (8-21)

Analysis of the key points of general structure design of automobile injection molded parts ...............................................Yao Liying (9-21)

Integrated application of industrial robot buckle assembly and ultrasonic welding ......................................Xu Shugeng, Zhang Rufei,Zhang Ruqiang (12-19)

12 MANUFACTURING AND PROCESS CONTROL

Design and application of online cross section scanning device...........Qian Yi, Shu Hanggang, Zhang Xiaowei, Lou Hong (6-60)

Application of deviation correction system control technology in sub-adjudication ....Wu Bo, Chen Feng, Lin Lijun, Liu Jing (7-64)

Design and implementation of enterprise material quota management system based on BS architecture ........................Wang Haijun (9-59)

Design of "Internet +" tire quality control system............................................Lou Hong, Liu Ling, Piao Longji (10-68)

13 PROCESS AND EQUIPMENTS

Study on tire sidewall bulge caused by mechanical reverse packaging of all steel radial tire.....................You Zhaoxin, Ge Ying, Che Xiangji, Zhou Ping(1-35)

Demoulding device and demoulding method for vulcanized rubber hanging of track pin ............................Wang Dong (2-23)

Second stage building machine automatic upper tire tube conveyor line of intelligent semi-steel two-stage building machine ................Zhao Yangang, Qin Yinfeng, Yao Liangliang,Pu Zhidong (2-27)

Influence parameters and optimization of shrinkage marks on the surface of injection molded parts ..... Wang Chunguo(2-32)

High precision control of tread winding of engineering tire.................................................................................Wang Jun (3-37)

Application of dehumidification and drying technology in injection molding industry ........................................Yang Li (4-30)

Discussion on the process and equipment of a regenerated rubber production line ...Wan Qingsu, Huang Xianghong (5-15)

Design of 8R22.5 14PR mountain scenery special all-steel tubeless load radial tire....................Jing Tao, Zhang Bin, Zhang Ying, Wang Zejun (5-19)

Introduction to the use of automatic adhesive strip system..................................................Chen Feng, Lin Lijun, Wu Bo (5-24)

A fitting device for engineering tire cutting machine...........................Li Baolong, Zhang Junkui, Zhao Jiandong (6-29)

Optimization of vulcanization process for 11.00R20 specification all-steel radial tire .........Zhang Xiaolin, Lu Yonggao, Wang Tingli,Wang Shuang, Feng Zihua, Zhang Weiyi, Jiao Dongmei (6-34)

Design and research of disc type waste rubber cracking equipment ...............Liu jidong, Zhang Cangang, Li Yong (7-31)

Research on the application of double-head electronic irradiation pre-curing technology on cord fabric calender machine.........................................................................................Chen Jun (9-26)

Research progress in modification of engineering plastics suitable for 3D printing............Chen Han, Li Mingqian, Lao Zhichao, Ma Xiuqing (10-30)

Design of 275/80R22.5 18PR all steel radial truck metric tire...................................Luo Huajuan, Yang Sikai, Song Qian (10-34)

Internal stress relief method for polycarbonate primerless alum inized parts ....................Tao Yongliang, Wang Xiaoguang,Liao Qiuming (11-33)

Characteristics and process application of silicone injection molding ....................................................................Yang Ji (11-37)

Discussion on the causes and solutions of melting marks on rubber-metal products............Fang Dong, Qiao Pan, Ma Zongbin, Sun Junping (11-41)

Failure analysis and process optimization of temperature-resistant water-based hot stamping products..........Hu Xuechuan, Li Youbing, Zhang Jixiang, Wang Ling (12-33)

Research on laser cladding process on the surface of screw element for extruder pelletizer............Wang Likai, Meng Yan, Wang Lu, Zhang Guangwei (12-37)

Polyethylene terephthalate (PET) injection molding technology............................................................................Deng Chaowei (12-41)

14 EXPERT INTERVIEW

Promote the new development of rubber engineering construc tion with the concept of green intelligent innovation——Interview with Mr. Wang Lijie, General Manager of Bluestar Engineering Co. LTD. .........................................RPTE reporter(3-1)

15 ENTERPRISE MANAGEMENT

Analysis and utilization of the latest electricity price composition of tire manufacturers.........................Jiang Haixiao, Wang Qiying, Bao Jianqing (3-65)

16 ENGINEERING DESIGN

Discussion on the scheme design and construction of rubber regeneration automation line ........................Zhu Mingyan (8-64)